Carbon Monoxide Detector The 5800CO is a 3V battery
powered wireless Carbon monoxide (CO) detector intended for use with Honeywell
alarm systems that support 5800 Series wireless devices. It provides early warning when its
electrochemical sensing technology measures carbon monoxide levels in the air.
The 5800CO is specifically designed for system operation and is fully listed to
UL 2075 as a system supervised detector.* It contains a piezoelectric horn
which generates the ANSI S3.41 temporal 4 pattern in an alarm condition. The detector
consists of an electrochemical carbon monoxide sensor assembly coupled with a
wireless transmitter. The transmitter can send alarm, trouble, end-of-life,
tamper and low battery condition messages to the alarm panel. Since there
are no holes to drill or wires to run, you can preserve the beauty of the home
or building while protecting its occupants from harmful carbon monoxide gas.
The 5800CO is an ideal carbon monoxide detector for difficult to wire
locations, applications where room aesthetics are critical or where hazardous
materials exist. What is
Carbon Monoxide and How Can it Harm Consumers? The 5800CO
is designed to warn the end-user well before the CO reaches a fatal level. The
detector’s CO sensitivity is evaluated to UL 2034.
Key Features Electrochemical
Sensing Technology - Electrochemical detectors are the newest, most refined CO
detectors available and provide the most accurate measurement of CO
concentration obtainable. They can take readings from low levels that may be
hazardous over long periods of time to high concentrations that present an
immediate danger. Local Sounder - A built-in
piezoelectric horn generates the ANSI S3.41 temporal 4 pattern in an alarm
condition. The local sounder will also alert the end-user of other conditions
such as low battery, detector trouble and end-of-life. LED Status
Indicators - Dual
LEDs provide local visual indication of the detector’s status–including normal
operation, alarm, low battery, trouble and end-of-life. End of Life
Timer - When
the detector has reached the end of its life, the detector will send a trouble
signal to the panel. This indicates that the CO sensor inside the detector has
passed the end of its life and the detector needs to be replaced. The
detector’s lifespan is approximately six years from the date of manufacture. Full
Supervision - The 5800CO is fully supervised to monitor for low battery, case tamper
and trouble conditions. Test/Hush
Button - This
dual purpose button allows the end-user to perform periodic testing of the
detector. In the event of a CO alarm, this button will silence the local
sounder alarm for a five minute period. Note: the Hush feature will not operate
at levels above 350 ppm (parts per million) carbon monoxide. Versatile
Mounting - Whether
you choose to affix the detector to the ceiling or a wall, mounting is made
simple with the enclosed hardware. The mounting base has large mounting ports,
which accommodate drywall anchors for easy surface mounting. Tamper
Protection and Tamper Resistant Element
- The detector has a built-in tamper switch that
can communicate back to the control panel in the event it is removed from the
base. For an added level of security, the detector also includes a tamper
resistant element that prevents removal from the base without the use of a
tool. If you would like more
information you can contact us by one of the methods listed in the need an
estimate located in the Customer Care or simply click HERE
|