GSM
Honeywell is focused on providing the future
of alarm communication solutions for the security industry. Alternative
communication methods are critical in the marketplace due to VoIP, migration
from POTS and global growth of digital networks.
Honeywell’s Digital Cellular Communicators
deliver secure, reliable and complementary digital communications via the GSM
(Global System for Mobile) network. Our use of Dual-Path GPRS service with SMS
backup provides substantial benefits to protect your investment.
Two-Way Voice over GSM
Honeywell’s GSM communicators with two-way voice transport capability via
AlarmNet, regardless of the premises phone system. Honeywell’s GSM products and
AlarmNet service have been designed to overcome communications challenges.
This groundbreaking communications solution
offers full data reporting and uploading/downloading with most Honeywell
control panels. In addition, with onboard zone inputs and optional dialer
capture capability, we’re compatible with other manufacturers’ security panels
as well. Honeywell communication products and control panels combine to make
installations faster and easier.
All signals are delivered to Honeywell’s
AlarmNet Network Control Center, which routes the information to the
appropriate central station. The state-of-the-art AlarmNet Network Control
Center is fully redundant and monitored 24/7. AlarmNet has the ability to route
messages using AlarmNet-i and 800 PLUS services, providing true redundancy and
multi-path message delivery.
Features
·
Full
Contact ID or ADEMCO High-Speed Reporting
Contact ID reporting
using ECP mode with compatible Honeywell control panels or combined with
optional dialer capture for non-ECP capable control panels.
·
256-bit
AES Encryption
Advanced encryption
standard used for secure communications.
·
Dual-Path
Technology
Uses GPRS (General
Packet Radio Service) as primary digital cellular path and automatically
switches to SMS (Short Message Service) if GPRS is unavailable.
·
Upload/Download
With select Honeywell
control panels using GPRS. Requires Compass version 1.5.8.54a or higher.
·
Integration
Quick and easy
installation of GSM for VISTA and other controls.
·
Dynamic
Signaling with Certain Honeywell Control Panels
Provides management of
control panel dialer and digital cellular communicator. Programmable priority
and delays determine signal path.
·
Diagnostic
LEDs
Provide signal
strength and status indications.
·
QOS
Quality of Service
diagnostics via AlarmNet supply vital information including when a message was received,
battery voltage, input voltage, signal strength and message path.
·
Web-Based
Programming
Allows complete
interactive programming from AlarmNet Direct. https://services.alarmnet.com
/AlarmnetDirect
·
Intelligent
Supervision
Any message generated serves
as a supervision message per optional 24 hour or 30 day intervals. This feature
effectively limits required messages to be sent.
·
Remote
Services Capability*
Optional Total Connect
value-added web-based or SMS system control as well as e-mail notification of
system events.
·
Two-Way
Voice Transport
GSM voice channel
capable to allow two-way voice session in conjunction with an AVS audio
verification system.
·
Universal
Control Panel
Compatibility Flexible
modes of operation allow ECP alarm reporting by Honeywell control panels, 4204
relay mode for Honeywell controls (that do not support ECP alarm reporting) and
zone triggering for use with other control panels.
·
Dialer
Capture Ready
Compatible with Dialer
Capture Intelligence Device DCID (for LYNX) or DCID-EXT (other control panels).
Captures Contact ID messages from the panel’s phone line and sends them to the
central station via the GSM radio (not agency approved).
·
Six
Input Zones
Digital processing for
improved detection and false alarm protection
·
Tamper
Protected Enclosure
Built-in tamper sends
a report when a tamper condition is detected and a restore when cleared.
·
Built-in
Power Supply
Onboard charging
circuit design accommodates back-up battery. Includes primary power and battery
supervision.
·
Back-Up
Battery
6V 3.1Ah supplied to
deliver up to 24 hours of standby operation.
*Service subscription required.
For more information click HERE.
|